How to mount 6" ATM offroad wheels to 15.22'double kingpin trucks ?

How to mount 6" ATM offroad wheels to 15.22'double kingpin trucks ?

Today, we will take 6 "ATM off road wheels and 15" DKP trucks as an example to teach you how to change the wheel bearings 8mm-10mm and installation by using the simplest and quickest way. There's no need to buy any other special tools.

Step 1:Disassemble the wheels

Step2:Use a hammer to get the 8mmbearings down carefully

Step3:Change the bearings 8mm to 10mm

Step4:Use a hammer to get the 10mm bearings in the wheels carefully


Step5:Assemble wheels with 10mm bearings

Step6:Wheel with 10mm finished

Step7:Mount the 6” ATM off road wheels to 15.22” DKP trucks

Step8:Tighten the screws

Step9:Assemble completed


Tips:

1.If you use the custom 15.22” DKP, two shaft sleeves are needed to be added in the two sides of the front wheels.

2.Be careful to avoid damaging the accessories!



πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰πŸ‘‰
More DIY electric skateboardΒ motor mount & truck viewΒ https://www.twomotor.com/collections/brushless-motor-mount-truck